Tide tables warn coastal walkers
18 November 2026
Coastal walkers in the UK need to know where to get tide times, how to read them, and what to do if they get cut off. The RNLI says "check tide times, watch the tide rising or falling, and leave enough time to get back before the tide blocks the route."
Where to get official or trusted tide times
The official tide times for the UK are maintained by the UK Hydrographic Office. Its tide tables show tide times for the next seven days at over 700 ports in the UK and Republic of Ireland. Met Office tide times are displayed for up to five days ahead for around 500 locations. The ADMIRALTY EasyTide service provides free access to 7-day tidal predictions for over 600 British Isles port locations.
The RNLI advises: "Use a trusted online source such as the Met Office for weather forecasts and tide times."
How to read a tide table
A simple tide table has a list of times of high and low water, with the predicted height of the tide beside each. Times are usually shown in 24-hour clock format. The height of the tide is measured in metres, above the lowest astronomical tide (LAT).
The UK RNLI says the tide comes in and out twice in each 24-hour period, and tide times vary at each location and change each day.
Most printed UK tide tables list times as Universal Time (UT) or Greenwich Mean Time (GMT). Check if online tide tables adjust for British Summer Time (BST) or not. If they do not, add 1 hour to times shown in GMT to convert to BST.
Here is a tide table example for guidance:
| Date | Time | Height (m) |
|---|---|---|
| 2026-11-19 | 08:00 | 1.2 |
| 2026-11-19 | 20:15 | 2.8 |
| 2026-11-20 | 08:45 | 1.3 |
| 2026-11-20 | 21:00 | 2.6 |
GMT vs BST: the seasonal time-change issue
The RNLI warns walkers to be aware of the difference between GMT and BST when reading tide tables. Most printed UK tide tables list times as UT/GMT, while some online tables automatically adjust to BST and some do not. The RYA says "online tide tables may use different conventions for seasonal time changes."
This means you may need to add 1 hour to tide times shown in GMT during the BST period (last Sunday in March to the last Sunday in October). Check whether the tide table you are using has adjusted times for BST or not.
How to use tide tables to avoid tidal cut-off
The RNLI says: "Check tide times, watch the tide rising or falling, and leave enough time to get back before the tide blocks the route."
Plan your route to avoid being cut off by rising tides. Check the time of high and low tide for your location. Decide your start and end points, and the time you will return. Make sure you leave enough time to return before the tide turns. Always check the weather forecast before going out.
RNLI rescue data shows crews and lifeguards responded to 7,971 incidents involving people cut off by the tide over the last decade, and 452 lives were saved.
What to do if you are cut off by the tide
If you do get caught out by the tide and are unable to get back to safety, do not try to wade or swim to safety.
Dial 999 and ask for the coastguard. The RNLI says: "If you're cut off, dial 999 and ask for the coastguard. Don't attempt swimming or wading, as this can put your life in danger. Wait in a safe place to be rescued."
You might also like: Paddleboarding coastal safety: tides, offshore winds and leashes · RNLI launches drone-assisted cliff-rescue trials at Beachy Head to cut response times · Journos Racing to Cash In on Gambling